phone  +31(0)76 20 71 400     email   info@vltest.com

TYRE INSPECTION SYSTEMS VLT3972, VLT3982

 

The VLT tyre inspection system can check several tyre and wheel related items, such as tread depth and sideslip. All measurements are done very fast when the vehicle is on the roller brake tester.

tyre inspection system
The VLT tyre inspection system uses stereo imaging to measure In the near future it will also measure camber and check for tyre side wall damage and nails in the tyre.

The VLT tyre inspection system is installed just after the roller brake tester. The measurements are done while the wheels are rotating and so the entire circumference is checked. This takes only a few seconds. The test results are printed (per axle) on the brake tester test report. The system uses stereo imaging to check the tyres. There are 2 digital stereo cameras per wheel. Clever software takes care of the rest.

VLT3972 for light vehicles requires subframes in order to install it in the conctrete floor. This will lower the camera units a few cms so that vehicles with very low ground clearance at the front can easily drive over.
VLT3982 for heavy vehicles can be installed on the concrete floor without the use of subframes, but we advise using a subframe. This lowers the height above ground of the unit.

GALLERY

tyre inspection system tyre inspection system tyre inspection system tyre inspection system
Roller brake tester V:T4233-G6